Home > PRODUCTS > CAMERA CRANES & JIBS >

Camera Crane Stand Support by ProAm USA
Camera Crane Stand Support by ProAm USA


 
Alternative Views:


Our Price: $59.00

UPC: 728028105452

Stock Status: In stock

SKU: STAND


3/8" Bearing Base Mount?:
Add 3/8" Pan Lockable Bearing Base Mount [Add $59.00]

Qty:  
Description
 

This custom-built support is designed specifically for the ProAm camera crane family of products and is not intended for use with other crane brands. It’s ideal for replacing tripods that aren’t rated for the weight of your professional camera, crane, and counterweights due to its all-aluminum mount that won’t break like standard plastic mounts..

This stand features a height of four- to six-feet, a capacity of 100 pounds, and smooth, effortless 360-degree panning motion. It can be used with any ProAm Camera Crane, including the 8' to 12' DVC210, 8' to 12' DVC200, DVC60 and DVC50 models.

Specifications:
  • 6' maximum height
  • 4' minimum height
  • 100lb. max weight capacity
  • 1 - 1/4" Aluminum tube structure
  • CNC Machined Aluminum Stand Mount
  • Smooth and effortless 360 Panning

The camera crane stand can be used with any ProAm Camera Crane including the DVC500, DVC250, DVC200 and DVC50.


Average Rating: 5 of 5 Total Reviews: 9 Write a review »

  0 of 0 people found the following review helpful:
 
Thank You!! December 15, 2015
Reviewer: Jamarie Milkovic from SAN FRANCISCO, CA United States  
Jennifer was an amazing resource to not only figure out the crane stand I needed but to make sure that I received it, when the package went missing! Thanks again for her diligence and help to sort things out with Amazon + UPS and most of all -- thanks for getting me the stand by when I needed it! Happy Holidays :)

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
12' and 20' Cranes July 17, 2015
Reviewer: Vince Montefusco from Ojal, CA United States  
ProAm is a great company with excellent customer support.

Their 12' and 20' cranes are rock solid. However, before you purchase any of their cranes, make sure the weight of your camera (including all attachments and accessories) match the load capacity of the crane you are interested in buying.  

And, like any new piece of equipment, there may be a slight learning curve, but I can assure you with ProAm's cranes, you'll be up and running in no time as they are very easy to setup and use!!  Funny story: When the 12' crane was delivered, I set it up in my home and started panning and the arm hit a flower vase my wife designed - oops...

I am a 40 year film & TV professional and will use their cranes on a new TV reality show. The 20' crane will have a remote motorized pan/tilt system and 2 operators.

You have my name and can look up my partial resume at www.IMDB.com.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Heavy duty stand! February 6, 2015
Reviewer: Adrian Sanchez from Bakersfield, CA United States  
I used my own stand thinking it was good enough to place my job on it but it would wobble after moving the jib for a little while cause the screw would always unscrew. Finally I decided to buy this stand, I thought there wasn't going to be almost the same thing as mine but I though wrong, the stand is very thick, and the top where you mount your jib was big enough to support the jib without worrying about it moving around.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great Products! November 27, 2014
Reviewer: Keith Moore from Russellville, AR United States  
Great company, great products!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Frances is a wonderful warm person November 19, 2014
Reviewer: Luis Mercado from RANCHO CORDOVA, CA United States  
I wish to deal with her everyday.
thank you so much

Was this review helpful to you?

View All Customer Reviews