Fast Setup and Smooth Movements
The DigiPilot 3-Axis Handheld Digital Camera Stabilizer from ProAm USA has a triple axis brushless gimbal that eliminates vibrations, allowing you to easily capture smooth, professional looking flying shots. With pre-programmed stabilization, set up time is reduced to get you shooting right away.
Effortless Floating Tracking Shots
The DigiPilot is a fully digital 3-axis camera stabilizer system created for DSLR and mirrorless cameras weighing up to 4 lbs. Its lightweight carbon fiber body and compact handheld design give you the freedom of movement without the need for post-stabilization. With the DigiPilot, you'll have complete flexibility to achieve effortless, smooth floating tracking shots.
Digital Brushless Bearing Gimbal
The DigiPilot Handheld Camera Stabilizer's digital and brushless motors remove all unwanted camera motion so you can shoot on any terrain.
- 3-Axis Fully Digital Gimbal eliminates vibration and camera shake
- Dual handle grips make operating it very comfortable
- Brushless motors are extremely smooth
- Wireless joystick allows quick adjustment to the camera position
The DigiPilot features several modes of operation for endless shooting styles.
- Mode 1: Heading Follow Mode – The Camera slowly tracks your movements.
- Mode 2: Still Heading Follow Mode with activated Joystick function
- Mode 3: Lock Mode – The camera stays locked in one position.
- Mode 4: Heading and Pitch Follow Mode – The Camera slowly tracks your movements on pan and tilt axis.
- Mode 5: Inverted Mode – An inverted mode can be achieved by flipping the gimbal upside-down in follow mode or you can restart in an inverted mode.
FEATURES AND SPECIFICATIONS
- Fully Digital 3-Axis Handheld DSLR and Video Camera Stabilizer
- Five operational modes for various filming styles
- Supports cameras weighing up to 4 lbs (1.8 kg)
- Pre-programmed for 1.5 to 4 lb camera loads
- Compatible with SimpleBGC for fine tuning
- Black carbon fiber and aluminum alloy frame
- Camera Screw: 1/4"-20 thumb screw included
- Unit Weight: 4.2 lbs (1.9 kg)
- Custom hard case with foam mold for storage or transport
- Shipping weight and dimensions: 12 lbs, 19" x 14.5" x 6.75"
- 1-Year Warranty and 30 Day Money Back Guarantee
- 1 x 3-Axis Handheld Digital Camera Stabilizer
- 1 x 2.4 GHz Mini Joystick Controller
- 1 x Gimbal Stand
- 1 x Hard Case
- 3 x Batteries
- 1 x Charger
Questions & AnswersAsk a Question
Hi there. I have a couple of questions. From what I can tell, my current rig of a Canon 5D Mark III with a 24-105 f/4 L series lens would push the weight to about 3.5 lbs. I know it shows to handle 4 lbs, but do you think that it's getting a little too close to handle for that DSLR and lens setup? I've used this same setup with a Ronin-M, and though it could handle it, the battery life lasted about 10 minutes due to the weight (it's max weight was 8 lbs.) Also, I run an Atomos recorder with my rig, which requires me to use the camera's HDMI out. Does this rig's configuration block this area on that camera? Any information would be appreciated. Thank you.
Thank you for the great questions! I've tested it with a 5DII and Tamron 24-70 lens where the total camera weight was 3.6lbs. Stabilizing works great, but you may have to pay a little more attention to balancing properly since it's near the limit. For lighter cameras, the motors can more easily compensate for improper balanced camera loads.
The joystick will be smoothest at lower speeds as the camera nears the weight limit, while full speed manual movements with the joystick can cause unwanted shaking. Full speed joystick controlling is recommended for positioning the camera prior to filming, and gentler motions used during filming. (This method is recommended for all camera weights)
For HDMI out, there is 1-1/4" space between the camera and the arm. See this image. The Mark II and Mark III are the same width of 152mm. I'd recommend a thin, right angle HDMI connector.
Forgot to ask one more question. The batteries shown appear to be similar to an 18650 type of rechargeable battery. Can you tell me the battery types that this rig uses? Thanks again.
You are correct, the batteries are standard 18650 type. I have not done full a full set with the 5DII and lens combination, but I'll test how much energy is possible with this heavier setup and update this answer. The benefit of using the 18650's is their availability and affordability over proprietary lithum ion batteries that are used in the DJI Ronins. a 6 pack of 18650 rechargeables is available on Amazon for $18.49 currently.
Hello, I use Canon XA35's for my productions. Will they work with this gimbal? Here are the dimensions. 4.3 x 3.3 x 7.2" / 10.9 x 8.4 x 18.2 cm (not including lens hood, grip belt, microphone holder and handle unit) Approx. 1.7 lb / 0.77 kg (includes grip belt) It is 4.25" from the 1/4" mounting hole to the back of the battery (with the larger battery installed). Please let me know and thanks! Best Xavier
Yes, the Digipilot will work great with the XA35. There is 4.25" clearance from the center of the mounting plate. The quick-release plate is 4.75" long so you'll have plenty of room to work with. I would mount the XA35 with at least 0.5" of clearance in the back. It may also be best to remove the handle grip, but there is still 6" of clearance vertically. The camera is lightweight enough that even if you must offset the camera some for clearance purposes, the motors will easily be able to compensate, but I don't expect you'll need to worry about that.
I need to buy it and when its will be available?
We're expecting to have more available in February. So sorry for the delay!
will this work with a D810 WITH A 24MM70MM?
Unfortunately we wouldn't recommend the Nikon D810 with the 24-70 lens combo as the motors may encounter some trouble moving the weight. The Digipilot works best with lighter-weight mirrorless cameras.